![]() ![]() For the arcs we use the command G02 (clockwise arc). The arcs are to be tangential to the straight lines. ![]() This should be 20 mm long and 10 mm wide. In this example program we want to mill the contour of a pocket. example program: traversing a pocket contour %Example CNC program in G code with two blocks: In the following command line (N020) the position X=100 and y=100 is approached at normal speed (G01), the travel distance is linearly interpolated. In the following example program, the command (N010) is first given so that the position x=50, y=50 and z=10 is approached in rapid traverse (G00). example: linear movement with rapid traverse and standard feed rate CNC program with G-Code – Example programs 1. This gives you enough space to add up to 9 command lines between two existing G-Code commands. The command usually consists of the address letter and one or more parameters.Įach record begins with a unique counter number, which is incremented in steps of ten (N010, N020, …). In the English-speaking world a block is also known as a “strong> block”/strong>. The block in turn consists of one or more commands. ![]() The CNC program is composed of several so-called blocks.Ī block corresponds to exactly one line in the machine program. Since the G-code is largely standardized, it can be executed on almost any CNC machine.Īs soon as the machine program is loaded into the machine, the job runs almost fully automatically in the ideal case. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |